Purple Plumbing Blog

Just another WordPress site

The Advantages of Instantaneous Hot Water Systems

Over the years, hot water heating systems have changed tremendously. Some use electricity, others use gas while still others operate on solar energy. However there will always be a debate over whether instantaneous hot water systems are better than storage type ones. The truth is, instantaneous hot water systems have their distinct benefits and are widely used even today.

Here are some of the advantages of using instantaneous hot water systems:

Constant Supply Of Hot Water

It is a myth that instant or tankless hot water systems are not as effective as storage ones. Properly adjusted and sized tankless systems are very effective in providing an endless supply of hot water. The current day systems are different from the small heaters that were available 20 years ago and the new ones are very efficient.

Space Saving 

A tankless hot water system can be installed either outdoors or indoors and are wall mounted. These surprisingly compact tanks have electronic pilots unlike the open-flame controls of tanked systems. This means that they can also be enclosed in cupboards, closets or other small areas where a tank system would be a definite no-no.

Longer Service Life With Lesser Maintenance 

Once this system has been installed, it will last far longer than a traditional tank-based one. It is also easier to maintain. Conventional tank-based water heating systems last for 7-10 years while a good quality tankless one can easily last 20 years. Another important factor is that almost every single component of the tankless system can be serviced and replaced individually without having to replace the entire unit.

Tank-based systems can be very high-maintenance. The tanks tend to spring leaks at the most inopportune moments; the pilot lamp can blow out and needs to be relighted every time that happens. Over a period of time calcite deposits also tend to build up inside the tank water heater which does not happen with the tankless one as no water is stored in it. Tank heaters also start up with certain pinging or other noises as they start heating the water. On the contrary, tankless water heaters are relatively noise-free and maintenance-free.

Higher Safety and Convenience

Since instantaneous water heating systems have neither a tank nor an open-flame pilot they are considerably safer than the storage heaters which have the twist knob settings. Tankless heaters have digital temperature setting systems.

Choosing the Best Taps When Renovating

When a house or a building is being renovated, the fixtures and fittings are something that you have to pay attention to. The styles and designs for these are so varied that it is difficult to decide which one you should eventually settle for. Looks are definitely a deciding factor but there are several others that you should consider before you buy the taps that you need.

Changing Tap Trends

When you go shopping for taps you will come across hob-mounted taps and mixer taps that come in a wide range of finishes such as chrome and steel and a wide range of colours too. Some also sport the classic antique look.

Interior designing trends are ever-changing and taps that were considered to be high-style a few years ago can end up being outdated before you know it. This is exactly the reason why you have must choose something classy but not too outlandish. Choosing the best taps is also about choosing quality and durability and this is a factor that you should be prioritising.

Here are a few tips for choosing the right kind of taps the next time you decide to remodel your home and have these fixtures replaced.

Maintain Equilibrium

Do not opt for the expensive and opulent European brands of basins, taps or toilets but don’t choose the cheapest quality either. Tread the median line and opt for a range that is easy to install, easy on the pocket and has easy availability of spare parts. It is best to opt for local brand fittings and fixtures. The parts are easy to come by and will be cheaper than looking for imported parts. In some cases these manufacturers also discontinue the manufacture of certain pieces and the spare parts are not only expensive but sometimes unavailable as well. In situations such as these the only option that you are left with is to replace the entire fitting.

Do A Rethink

Replacing kitchens sink or wash basin taps is not a very difficult task. But when shower mixers have to be replaced it becomes an altogether different matter as the fittings are concealed. It is best to replace these kinds of fittings when you undertake a bathroom remodelling project. Before you splurge on any kinds of taps remember its function and use. There are people who end up spending thousands of dollars on fittings alone

The Taps

Hob mounted taps have spindles that need a ceramic disc or a washer. Both have their pros and cons but ceramic discs tend to be more expensive. However, you end up saving on washer replacement. Washer spindles that tend to be cheaper need to be replaced faster as well. Chrome taps have been in vogue for a long time now. Avoid choosing cream, white or gold plated ones. They are outdated and the parts are difficult to find.

Basin Shape

The basin that you buy should also match the taps that stand above it or vice versa. There are recessed and semi-recessed basins and you can pick one based on the space you have. The bathroom vanity should also match the basin and the taps you pick.

 

When you choose anything for your home, also think of resale value. It is a plus to have good fittings and amenities in your home and good quality taps are definitely a good investment. Buyers do not want to go into the hassle and expense of spending on remodelling everything when they move in.

What To Do In An Emergency Plumbing Situation

First Thing To Do: Shut Off The Main Water Supply To The Home 

This is the very first thing you should do in an emergency plumbing situation. Shutting off the water supply stops additional water from flowing through and compounding the disaster. Do you know where the main water valve of our home is situated? You should. It is important that everyone in the family should know this BEFORE the emergency happens so that whoever comes home and find a major leak flooding up the bathroom or the kitchen knows exactly where to go to shut it down and stop the leakage. Searching for the valve during the emergency adds precious minutes that could make a huge difference.

Secondly: Shut Off The Gas Line

If your home has water heaters, it is important to shut off the gas line along with the water supply to prevent the unit from getting overheated or from breaking because there is no water running through it.

Thirdly: Call A Reliable Plumber

Do you have your plumber’s phone number on speed dial or at least someplace handy? If you haven’t already done this, do it today. Can you even imagine the nightmare of trying to find the contact details of nearest plumber through the internet while the pipe is gushing water or the drain is spewing out its contents in the background?  The best way to decide which plumber’s name you want on your speed dial is to ask your friends, family or neighbours for someone they would recommend.

The faster you can arrange for a professional plumber to attend to the emergency, the faster the situation will be resolved, which of course means lesser damage to property and a quicker return to normalcy for the whole family. There’s just no substitute for having the contact details of a reliable plumber who is just a phone call away when you have an emergency plumbing situation.

Is A Cheap Plumber Really Cheap?

More than just throwing your home completely out of gear, a blocked drain, a leaky tap or a busted pipe can also end up causing damage to your home. At times like these, having a good plumber on call is critical. Problem is plumbing costs can be high sometimes and that makes people look for a cheap plumber. But do cheap plumbers really help save you any money or do they work out costing you more in the end?

 

Every city and every area has service providers who are quick on the response, provide excellent client service and are inexpensive as well. The trick lies in being able to find one that will offer you all of the above.

 

The Paradox

There are plumbing companies who provide excellent service and are prompt and efficient but their fees are usually sky high.

You may find a cheap plumber that seems to provide similar services but this is never something that you can be sure of. Some cheap plumbers will end up cutting corners either on material they use or the service they provide you with.

On the other hand, there are plumbers who will provide you the best of services and use high quality materials and still not overcharge you. If you are able to find a company or a plumber who meets all these parameters, consider yourself truly lucky.

 

The Perfect Blend

The key is in finding a plumber who is professional, skilled and trustworthy. A plumber should be able to work safely, quickly and be on call in case of an emergency without much of a delay. It is important to speak with family and friends and get some references from them. It is possible that someone you know must have used the services of a good, cheap plumber from the locality. Take their suggestions and see how good a job the same person does for you.

 

Test Time

 

If you are trying out a new plumber, it is best to try their services for a small job first.

Call the person in to so some simple fixture work or have him clean out a blocked drain. If he completes that job within the stipulated time frame, uses good materials and displays expertise and efficiency, he is the right plumber for you. Remember that plumbing companies are as eager to maintain their reputation as homeowners are to find a good plumber. Any unfavourable review will only mean loss of existing customers and potential ones. A dissatisfied customer will relay the information to ten other people and word of mouth can be the best and the worst kind of publicity.

 

Opt For Quality

 

When you hear the phrase “cheap plumbing” or “cheap plumbers” you should be a little cautious. You need to ask yourself whether it’s really possible to get good quality at a cheap price. Plumbing is a specialized field. Most “cheap plumbers” end up being “fly-by-wire” ones who may not be around the next time you want them to fix that blocked drain. At the end of the day, quality and good service cannot always be provided at a low cost.

 

However, professional, high-end companies will do the job right the first time to ensure that the same doesn’t occur again so you know that no matter how much you pay them, it would still be cheaper than using a fly by night cheap plumber.

What Is A High Pressure Water Jet And How Does It Work?

High pressure water jets have revolutionised the way blocked drains are cleared today. Fast, efficient and with minimum damage to the surrounding areas, high pressure water jets are the new buzz word in drain cleaning today. No more laborious and messy digging and cutting to unblock drains. The high pressure water cleaning system simply blasts the blockage through the drain!

How Does It Work? 

Over time, seemingly harmless deposits of grease, detergents, hair and other thingamajigs that find their way down the drain will start to accumulate and obstruct the flow of water. As the water slows down, more materials get accumulated, blocking the drain completely and causing the water to back up. Another common cause of blocked drains is tree roots that exploit existing defects in pipes in their search for water and nutrients. Once inside the pipe, the continuous flow of water and nutrients helps them thrive and spread out even more, resulting in a dense mass that causes a drain blockage.

High pressure water jets operate at pressures that are in the range of 1000 psi to 5000 psi. At this high pressure, the flow of water acts as a sharp knife and cuts through whatever is blocking the drain, whether it is the build up of accumulated gunk from the household pipes or tree root intrusions. As it cuts through the blockage, the powerful force of the water dislodges the debris and sediment and carries it away down the drain.

These jets are capable of operating at pressures as high as 20,000 psi but at anything higher than 5000 psi, it is powerful enough to cut through the pipe. Unless absolutely necessary, very rarely will any Sydney plumber exceed 5000 psi for unblocking a drain.

Shower Drain Maintenance

Add Power To Your Shower Drain Maintenance With These Easy Tips

When water starts filling up around your ankles while you were taking a shower, you know it is way past clean-up time. Not only is a blocked shower drain unclean but it can also play havoc with your bathroom floor and lead to leaks and drips in other areas. This in turn can cause ugly and unhealthy mould growth in various areas of your house. The fact is, all of this unpleasantness can be easily avoided. Regular shower drain maintenance is the best way to save yourself time, trouble and money and also maintain a healthy environment in your home.

 

What Causes Blocked Shower Drains?

Accumulated hair is one of the major causes of shower drain blockages. Over a period of time, the hair that does not get cleared out from the drain creates a mesh of sorts. Shampoo residue, dirt and debris get entangled in it and lead to a drain blockage. It doesn’t take long for a build-up of this kind to take place and before you know it, you will be bathing in a shallow swimming pool.

 

Shower Drain Maintenance Tips

Maintaining your shower drain requires nothing more than just keeping it clean and free of debris.

Here are a few simple tips for keep your shower drain clog free:

  • Keep It Clean: The simplest thing you could do to avoid a blocked shower drain is to keep it clean. Pick up hair when you see it lying there as you shower. Use a drain basket or a screen to catch the major part of the hair before it escapes into the drain. 
  • Use The Plunger Regularly- This simple device is a blessing in disguise. A few plunger-pushes every other day will dislodge any obstacles and help the water drain out more quickly. 
  • Use An Enzyme-Based Detergent – Enzyme-based drain cleaners work effectively to break up grease, proteins as well as other stubborn deposits. Simply pour a cupful of the cleaner down the drain, let it sit for an hour and then flush it down with boiling hot water.
  • Vinegar & Baking Soda Works Like Magic - Dump 1/3rd cup of baking soda followed by a cup of vinegar into the drain. Cover the fizzing drain with a rag or an upturned bowl and leave it. Flush it out with boiling hot water after about 10-15 minutes.

 

Despite all the maintenance measures mentioned above, if the drain situation seems more than you can handle by yourself, call in a professional plumber